gemellocattivo.com http://gemellocattivo.com/forum/ |
|
Models to share http://gemellocattivo.com/forum/viewtopic.php?f=19&t=153 |
Page 1 of 3 |
Author: | mk e [ Fri Jun 12, 2015 4:03 pm ] | ||
Post subject: | Models to share | ||
Here's where everything stands on 6/12/2015 If you want to play with it unzip it, open EL Console, file/open session/builds/Build2015_06_12 Layout/Open Layout/Layout/Layout2015_06_12 and you should be looking at nearly everything you need to setup fuel and spark control on an engine it's still missing fuel accel/decel corrections fuel temp correction maybe I'll add individual injection/coil enable/disable control individual cylinder tuning I put my comments in the build script (Scripts/BuildScritp), I'll probably add more over time but the basics are there and you can try building the model if you like but you'll need to correct the folder names in the script to match where YOU have them saved.
|
Author: | cribbj [ Sat Jun 13, 2015 7:21 am ] |
Post subject: | Re: Models to share |
Mark, no Layout folder or files in the zipped file? |
Author: | mk e [ Sat Jun 13, 2015 8:43 am ] | ||
Post subject: | Re: Models to share | ||
cribbj wrote: Mark, no Layout folder or files in the zipped file? oops Here you go
|
Author: | a1exander [ Thu Jun 18, 2015 2:20 am ] |
Post subject: | Re: Models to share |
"If you want to play with it unzip it, open EL Console," What is this EL Console you speak of and how does one go about acquiring such? |
Author: | mk e [ Thu Jun 18, 2015 11:56 am ] |
Post subject: | Re: Models to share |
a1exander wrote: "If you want to play with it unzip it, open EL Console," What is this EL Console you speak of and how does one go about acquiring such? Its in the next down viewtopic.php?f=19&t=150 and this should be the zip file: download/file.php?id=859 |
Author: | mk e [ Tue Oct 20, 2015 3:35 pm ] | |||
Post subject: | Re: Models to share | |||
Here's current as of 10/20/2015
|
Author: | mk e [ Wed Nov 11, 2015 8:18 am ] | |||
Post subject: | Re: Models to share | |||
Current as of 11/10/15 updated 11/26/15
|
Author: | mk e [ Thu Nov 26, 2015 11:33 am ] |
Post subject: | Re: Models to share |
i just realized on 11/10 I posted an old layout. I updated the post with the correct file so now you can actually see all the cool new stuff instead of trusting me that it's there |
Author: | maineSAEclub [ Tue Apr 19, 2016 2:50 pm ] |
Post subject: | Re: Models to share |
Do you have a model for an Infinity 6 ECU? |
Author: | mk e [ Tue Apr 19, 2016 6:21 pm ] |
Post subject: | Re: Models to share |
maineSAEclub wrote: Do you have a model for an Infinity 6 ECU? Sure....it's exactly the same All the infinity ECU use the same processor and will run the same models. the only differences are the number of pins so you might need to reassign some things to a pin you have but that is really easy. The first thing to do is contact Jim at enginelab and get your ECU added to the list that will run the enginelab firmware and he'll also probably set you up wiht an account to access the repository...and my stuff is there or I can email a copy. |
Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |