gemellocattivo.com http://gemellocattivo.com/forum/ |
|
NBO2 calibration http://gemellocattivo.com/forum/viewtopic.php?f=19&t=169 |
Page 1 of 1 |
Author: | mk e [ Fri Oct 30, 2015 8:22 pm ] |
Post subject: | NBO2 calibration |
So I've been working on code all week that samples a sensor based on crank angle thinking I can use a NBO2 in the collector and assign a signal to each cylinder. My thought at the moment is that I can probably compare the output on the NB sensor in the group collets to the output of the WB in the bank collects to get a calibration factor to use the NB data for cylinder tuning even well away from stoich ..hmmmmm |
Author: | mk e [ Mon Nov 02, 2015 9:07 pm ] |
Post subject: | Re: NBO2 calibration |
I'm pondering just calling the average of all readings from each NBO2 equal to the WB reading and then scaling the individual readings. It wouldn't be exactly right but I'm thinking it would be close enough and maybe disable the feature if the cylinder to cylinder error exceeds say 10%. maybe...... |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |