gemellocattivo.com

Which means "Evil Twin". Lets see your projects where you change boring into fun or create the fun from scratch.
It is currently Wed Oct 23, 2019 9:27 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Models to share
PostPosted: Fri Jun 12, 2015 4:03 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
Here's where everything stands on 6/12/2015

If you want to play with it unzip it, open EL Console,
file/open session/builds/Build2015_06_12
Layout/Open Layout/Layout/Layout2015_06_12

and you should be looking at nearly everything you need to setup fuel and spark control on an engine
it's still missing
fuel accel/decel corrections
fuel temp correction

maybe I'll add
individual injection/coil enable/disable control
individual cylinder tuning

I put my comments in the build script (Scripts/BuildScritp), I'll probably add more over time but the basics are there and you can try building the model if you like but you'll need to correct the folder names in the script to match where YOU have them saved.


Attachments:
models2015_06_12.zip [283.55 KiB]
Downloaded 281 times
Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Sat Jun 13, 2015 7:21 am 
Offline

Joined: Sat Jan 03, 2015 5:40 am
Posts: 188
Mark, no Layout folder or files in the zipped file?


Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Sat Jun 13, 2015 8:43 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
cribbj wrote:
Mark, no Layout folder or files in the zipped file?


oops :oops:

Here you go


Attachments:
Layout.zip [234.44 KiB]
Downloaded 283 times
Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Thu Jun 18, 2015 2:20 am 
Offline

Joined: Fri Jan 02, 2015 6:42 pm
Posts: 109
"If you want to play with it unzip it, open EL Console,"

What is this EL Console you speak of and how does one go about acquiring such?


Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Thu Jun 18, 2015 11:56 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
a1exander wrote:
"If you want to play with it unzip it, open EL Console,"

What is this EL Console you speak of and how does one go about acquiring such?


Its in the next down
viewtopic.php?f=19&t=150

and this should be the zip file:
download/file.php?id=859


Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Tue Oct 20, 2015 3:35 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
Here's current as of 10/20/2015


Attachments:
Layout - Main.zip [2.26 KiB]
Downloaded 263 times
Build2015_10_20.zip [14.01 KiB]
Downloaded 262 times
Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Wed Nov 11, 2015 8:18 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
Current as of 11/10/15

updated 11/26/15


Attachments:
Layout - Main.zip [4.61 KiB]
Downloaded 239 times
Build2015_11_10.zip [22.83 KiB]
Downloaded 261 times
Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Thu Nov 26, 2015 11:33 am 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
i just realized on 11/10 I posted an old layout. I updated the post with the correct file so now you can actually see all the cool new stuff instead of trusting me that it's there :)


Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Tue Apr 19, 2016 2:50 pm 
Offline

Joined: Tue Apr 19, 2016 2:41 pm
Posts: 1
Do you have a model for an Infinity 6 ECU?


Top
 Profile Send private message  
 
 Post subject: Re: Models to share
PostPosted: Tue Apr 19, 2016 6:21 pm 
Offline

Joined: Thu Jan 01, 2015 6:47 pm
Posts: 2843
maineSAEclub wrote:
Do you have a model for an Infinity 6 ECU?


Sure....it's exactly the same :)

All the infinity ECU use the same processor and will run the same models. the only differences are the number of pins so you might need to reassign some things to a pin you have but that is really easy.

The first thing to do is contact Jim at enginelab and get your ECU added to the list that will run the enginelab firmware and he'll also probably set you up wiht an account to access the repository...and my stuff is there or I can email a copy.


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group