gemellocattivo.com http://gemellocattivo.com/forum/ |
|
FrankenFerrari - V12 ferrari 308 part 4 http://gemellocattivo.com/forum/viewtopic.php?f=2&t=319 |
Page 12 of 222 |
Author: | TheDarkSideOfWill [ Wed Jul 31, 2019 2:17 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
You can have the chamber welded up and CNC'd by then. |
Author: | mk e [ Wed Jul 31, 2019 2:20 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
TheDarkSideOfWill wrote: You can have the chamber welded up and CNC'd by then. maybe....I still need to finish the block tear down too and see if there are any other problems hiding. |
Author: | mk e [ Wed Jul 31, 2019 2:24 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
I also need to figure out how to leak test the cam galley to intake port welds...I suspect there are issues similar to the coolant leaking issues I had....a few ports are oily. A couple cylinders honestly don't look like they were ever running, the dyno will be helpful hunting stuff like that. I just have lights above the house garage doors left on the list, so my plan is to begin a push on the ferrari. get this frikin engine fixed and debugged and tuned over the winter and drive in the spring. |
Author: | mk e [ Wed Jul 31, 2019 4:54 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
head gaskets ordered...$200 |
Author: | mk e [ Thu Aug 01, 2019 2:43 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah.... Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting. |
Author: | TheDarkSideOfWill [ Thu Aug 01, 2019 3:15 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
What pistons do you have? Mahle Motorsport? |
Author: | mk e [ Thu Aug 01, 2019 3:28 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
TheDarkSideOfWill wrote: What pistons do you have? Mahle Motorsport? JE |
Author: | mk e [ Thu Aug 01, 2019 3:40 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
mk e wrote: unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah.... Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting. $693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well) This will need to go past Lana before the order goes out. |
Author: | mk e [ Fri Aug 02, 2019 7:43 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
mk e wrote: mk e wrote: unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah.... Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting. $693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well) This will need to go past Lana before the order goes out. So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. |
Author: | mk e [ Sun Aug 04, 2019 8:06 am ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
mk e wrote: So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. Got a nipple on the wheels this morning....fingers crossed |
Page 12 of 222 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |