gemellocattivo.com
http://gemellocattivo.com/forum/

FrankenFerrari - V12 ferrari 308 part 4
http://gemellocattivo.com/forum/viewtopic.php?f=2&t=319		 Page 12 of 221
Author:  TheDarkSideOfWill [ Wed Jul 31, 2019 2:17 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
You can have the chamber welded up and CNC'd by then.
Author:  mk e [ Wed Jul 31, 2019 2:20 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
TheDarkSideOfWill wrote:
You can have the chamber welded up and CNC'd by then.


maybe....I still need to finish the block tear down too and see if there are any other problems hiding.
Author:  mk e [ Wed Jul 31, 2019 2:24 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
I also need to figure out how to leak test the cam galley to intake port welds...I suspect there are issues similar to the coolant leaking issues I had....a few ports are oily. A couple cylinders honestly don't look like they were ever running, the dyno will be helpful hunting stuff like that.

I just have lights above the house garage doors left on the list, so my plan is to begin a push on the ferrari. get this frikin engine fixed and debugged and tuned over the winter and drive in the spring.
Author:  mk e [ Wed Jul 31, 2019 4:54 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
head gaskets ordered...$200
Author:  mk e [ Thu Aug 01, 2019 2:43 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.
Author:  TheDarkSideOfWill [ Thu Aug 01, 2019 3:15 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
What pistons do you have? Mahle Motorsport?
Author:  mk e [ Thu Aug 01, 2019 3:28 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
TheDarkSideOfWill wrote:
What pistons do you have? Mahle Motorsport?


JE
Author:  mk e [ Thu Aug 01, 2019 3:40 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
mk e wrote:
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.


$693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well)

This will need to go past Lana before the order goes out.
Author:  mk e [ Fri Aug 02, 2019 7:43 pm ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
mk e wrote:
mk e wrote:
unfortunately we do not accept 1 piston orders 2 is the min and blah, blah, blah....

Ok.... can you please give the price for whatever the minimum order is to get me the 1 piston need????? Back to waiting.


$693.97 for 2 pistons, 1 pin, 24 wire locks and a new set of rings (all 12 cyl, figure might as well)

This will need to go past Lana before the order goes out.


So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. :shock:
Author:  mk e [ Sun Aug 04, 2019 8:06 am ]
Post subject:  Re: FrankenFerrari - V12 ferrari 308 part 4
mk e wrote:

So I talked to Lana about ordering the piston.....and Lana explained to me the I have a budget which I spent on the wheels and dyno so until the old wheels are sold or a new budget year begins I'm not allowed to buy anything. :shock:


Got a nipple on the wheels this morning....fingers crossed :)
Page 12 of 221 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/