gemellocattivo.com http://gemellocattivo.com/forum/ |
|
FrankenFerrari - V12 ferrari 308 part 4 http://gemellocattivo.com/forum/viewtopic.php?f=2&t=319 |
Page 55 of 221 |
Author: | Montreal328 [ Thu Sep 17, 2020 12:04 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
Mark, you're going to have to rename your website, a bit misleading at this point. Sorry, just still hungry for metal chips! |
Author: | mk e [ Thu Sep 17, 2020 2:19 pm ] | ||
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 | ||
Montreal328 wrote: Mark, you're going to have to rename your website, a bit misleading at this point. Sorry, just still hungry for metal chips! I know.....stopped at harbor freight this morning and picked up a new drill bit set. Tried to make a part for work and realized I was missing so many sizes at this point it was best to just start over. It was harbor freight so I had to repair the index and 1 bit was the wrong size...but its much more a set than I had left in the old index so I'm ready(ier) to start making chips!
|
Author: | TheDarkSideOfWill [ Thu Sep 17, 2020 3:25 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
Don't you have your own drill sharpener? |
Author: | mk e [ Thu Sep 17, 2020 3:56 pm ] | ||
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 | ||
Can't sharpen what isn't there....I break stuff
|
Author: | mk e [ Thu Sep 24, 2020 12:45 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
I called the machine shop today. Measure the rods and mains then grind the crank to match - about $350 Dust the valve so I know they're straight - about $100 Hone the cylinders in the block - like $600-800 The basement is consuming all the money but I need to get the engine back together....I'll need to talk to Lana. |
Author: | mk e [ Sun Sep 27, 2020 9:33 am ] | |||
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 | |||
Outside I'm up to stucco but the weather is not cooperating and it looks like Thursday before I have another shot at stucco weather...or perhaps it is as this means some shop time Between covid meaning I have little interest in interacting with others so say sell my broken BMW and the basement project meaning I know have way less places to store stuff....the shop got STUFFED! and I'm down to a tiny little work space. So today the plan is to play a game of musical stuff and see if I can open up room to work on an engine and perhaps even see the car again. The one one head is STILL on the mill . Once I clear some space, which is probably an all day effort, I'll be back on replacing the 3 or 4?, I forget intake seats, cut the exhaust seats and I guess drop the valves at the shop to be trued up....they said they are running a 3-4 week lead time but I'm hoping on a small hourish job they use it as a fill-in and won't take a month so I cn get the heads reassembled at least. On that note...off to organizing, which I hate.
|
Author: | mk e [ Sun Sep 27, 2020 11:13 am ] | ||
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 | ||
Its only out to switch bays but it was at least out so it gets a pic post
|
Author: | TheDarkSideOfWill [ Sun Sep 27, 2020 11:36 am ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
It *LOOKS* fantastic! |
Author: | mk e [ Sun Sep 27, 2020 12:05 pm ] |
Post subject: | Re: FrankenFerrari - V12 ferrari 308 part 4 |
What's that ey say, it doesn't matter if you win or lose, its how you LOOK doing it |
Page 55 of 221 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |