gemellocattivo.com http://gemellocattivo.com/forum/ |
|
New Type 4 VW build http://gemellocattivo.com/forum/viewtopic.php?f=2&t=325 |
Page 4 of 8 |
Author: | mk e [ Thu Aug 08, 2019 7:41 am ] |
Post subject: | Re: New Type 4 VW build |
FoaTech wrote: I am planning on making a guide fit with less press so I can do some preliminary machine work and then get the guide out of the way for port work, then slip it in again for flow testing. That's what I as well, a slip in alum guide, with a little vacuum grease to seal it. I do slip in alum seats too if its something I'm really modifying. |
Author: | MerlinTech [ Mon Sep 21, 2020 7:07 am ] | ||||
Post subject: | Re: New Type 4 VW build | ||||
I am almost finished with one cylinder. I have it pretty much shaped, a few details to clean up and the final valve seat finishing. The numbers are really good. Very happy. The chambers should finish at 60cc, so that puts my compression right inline with what I wanted. Max was 9.5:1 and this makes it 9.38:1.
|
Author: | MerlinTech [ Tue Oct 20, 2020 6:39 am ] | ||
Post subject: | Re: New Type 4 VW build | ||
I have all of the seats cut. Time to start grinding for a while. Then flow test again and touch up the final seat cut, set spring heights, and rocker geometry. I am getting there.
|
Author: | mk e [ Tue Oct 20, 2020 9:01 am ] |
Post subject: | Re: New Type 4 VW build |
Yes, setting spring heights.....that my my this week project too. Target run date? |
Author: | MerlinTech [ Tue Oct 20, 2020 1:04 pm ] |
Post subject: | Re: New Type 4 VW build |
mk e wrote: Yes, setting spring heights.....that my my this week project too. Target run date? Spring? Sometime this spring. |
Author: | mk e [ Thu Aug 19, 2021 9:39 am ] |
Post subject: | Re: New Type 4 VW build |
VW news? Winter at this point? |
Author: | TheDarkSideOfWill [ Thu Aug 19, 2021 9:48 am ] |
Post subject: | Re: New Type 4 VW build |
He's aiming for the same spring I am. |
Author: | MerlinTech [ Thu Aug 19, 2021 12:30 pm ] |
Post subject: | Re: New Type 4 VW build |
I have been side tracked as well. The guides and seats and porting is 99%. Final touches are needed. I have the engine completely apart. Case is in very good condition. The only surprise was the massive crack between the seats of the right side head. It was not long for the world. Then there is Stella, I have been working on her and she is running great but I have a 350 small block that needs to finished. Flat top, Reed solid roller cam. It has stock heads that need some bowl work and gasket matching to be what they need to be. Work has me going 10-12 hr days and I am tired. I need more me's. |
Author: | MerlinTech [ Wed Jan 05, 2022 8:16 am ] | ||||||
Post subject: | Re: New Type 4 VW build | ||||||
I am back on the Type 4 build. I have the cylinder shims and I am setting the deck height and figuring out push rod length and rocker geometry. There is some fine tuning to be done to get all the parts to match up. The cam gear slots didn't let the bolts fit. They are slotted and needed to go on the rotary table and get opened up a bit. The oil pump hits the cam bolts, will need to fix that. But that all comes later. Here are a few pictures of the mock up.
|
Page 4 of 8 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |