gemellocattivo.com http://gemellocattivo.com/forum/ |
|
Welding wheels http://gemellocattivo.com/forum/viewtopic.php?f=7&t=327 |
Page 3 of 13 |
Author: | Brian A [ Sat Feb 02, 2019 5:25 pm ] | ||
Post subject: | Re: Welding wheels | ||
In 1989, to accommodate ABS, Ferrari modified the wheel shape. My 1983 wheels are the last of the classic Ferrari throwing star style (used until 1988 328). The Testarossa used an even simpler star. After that; no more. Here is the 1989 328 wheel:
|
Author: | mk e [ Sat Feb 02, 2019 6:01 pm ] |
Post subject: | Re: Welding wheels |
I'm not a fan if the abs wheels...they just look wrong. When I got my car it had the same wheels as yours..but I wanted 18...bought some cheap aftermarket then switched to the 550, also cheap. Now it needs the gemello cattivo look, so almost stock 308 looking. |
Author: | Brian A [ Sat Feb 02, 2019 6:28 pm ] |
Post subject: | Re: Welding wheels |
mk e wrote: I'm not a fan if the abs wheels...they just look wrong … Now it needs the gemello cattivo look, so almost stock 308 looking. Yay!
|
Author: | mk e [ Mon Feb 04, 2019 2:53 pm ] | ||||
Post subject: | Re: Welding wheels | ||||
I did a couple 3 pc wheel assemblies....hmmmmmm
|
Author: | mk e [ Mon Feb 04, 2019 4:21 pm ] | ||
Post subject: | Re: Welding wheels | ||
Here's where I'm leaning....fit the center as tight as I can to the outer rim to give is a more 1 pc look...its not bad. If I paint instead of power coat, I could put seam sealer or similar in the groove and really blend it. Maybe hold that thought to see how the parts fit up.
|
Author: | mk e [ Thu Feb 07, 2019 8:43 am ] |
Post subject: | Re: Welding wheels |
I sent the wheel center design out for quote....$500 each so it looks like I'll be making them myself when the time arrives. |
Author: | mk e [ Sat Feb 09, 2019 11:24 am ] | ||
Post subject: | Re: Welding wheels | ||
Tired old slicks gone, time to clean them up and see what $$ they bring.
|
Author: | mk e [ Sat Feb 09, 2019 4:27 pm ] | |||
Post subject: | Re: Welding wheels | |||
I may get to weld a wheel after all....I have a racked bmw wheel and welding means an extra $200 for the ferrari. I noticed it just felt heavy....27lbs. Its 17×8. The 550 front is 18x8.5 and 22lbs. The 18x10.5 is 25lbs. Onshape says the rear 3 pc is 18lbs Edit - no I forgot to set material to for the center.....29lbs. The design will need so work it seems.
|
Author: | mk e [ Sun Feb 10, 2019 12:02 pm ] |
Post subject: | Re: Welding wheels |
The 550 wheels are list, so if you want to own a little piece of history now is your chance ! https://www.ebay.com/itm/Ferrari-OEM-55 ... 3695674011 |
Page 3 of 13 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |