I didn't say it would see 8500 every day in the driveway...
I have a fairly gigantic oil cooler that I'm integrating into the system. It's a tube and shell heat exchanger with a core 3" diameter and 18" long. I had it built for this app with 1 1/4 water connection on one end for the pipe and the body and 1 1/2 at the other end for the pipe at the engine. Of course when I ordered it I didn't know what the final mounting angle would be, so the drain plug isn't even close to a useful location, but there it is.
https://www.realfierotech.com/posting.p ... 3&p=157586[quote="The Dark Side of Will" post_id=157586 time=1552965293 user_id=129]
Here's the oil cooler and all the lines installed. After these pics, I filled the cooling system and actually started the MoFo for the first time in over a year.
However, I did not start it with the oil side of the oil cooler connected. I capped the oil lines on the cooler and used a non-oil-cooler filter adapter. I'm still organizing the oil filter adapter and I need to lap the seats on the cheap Summit fittings because they were showing some bubbles during the pressure test.
[/quote]